| Ordering |
February 2002 Special Expires 29 Feb 2002:
Buy the Software and Receive both Michael Jenkins Stock market Geometry
books Free!! A value of US$200 |
Introduction:
If you want to use Gann's techniques,
Ganntrader 3.0 is a complete Gann program available that you can turn
to for help. In this one package, all the methods that you must learn
in order to make effective use of the techniques are built into the
program. These are:
the geometric angles
division of the range
7 times the base
squares of the high, low and the range
natural squares of 52, 90, 120, 144 and 360
What's more, the study of the planet
time cycles and aspects is an important part of Gann's work that
should not be overlooked. With this version of Ganntrader, all
aspects of Gann's methods that have been discovered have been
included. In fact, other detracting technical analysis techniques
have intentionally been excluded. You can be sure that Ganntrader 3.0
is pure unadulterated Gann.
GT 3.0 has all the features of
GannTrader 2.1 plus a whole lot more!!
GannTrader 3.0 moves your trading and
analysis moves closer to Gann's Masonic Mysteries.
Imagine being able to Square the Circle using Fib Ratios, Ratios of the Circle and the
Squares of Numbers
Ganntrader 3.0 has been designed to
allow you an easy way to test and verify each of Gann's techniques
that he describes in his books. That makes practicing the required
techniques easy!
Click here to read Peter
Pich's comments about his own
software.
Features:
Up to 1200 price bars displayed, depending on
video mode with unlimited
zoom capability
down to 10 bars on the screen.
Optional mouse support with pull down menus. Keystroke
equivalents.
Built-in help displays.
Project blank grids with angles, squares, or planets out to future
dates.
Optionally excludes weekday holidays in a trading day chart.
Print or display volume and open interest.
Print or display 5 or 6 trading day, 7 calendar day or 5 day
charts.
Print charts at 8, 12, and 24 grids per inch. NLQ 24 pin printers
print
at 20 grids per inch instead of 24. Grid patterns can be 8x8, 8x10 or
10x10. Charts can be
over 50 feet in
length and 8 or 13 inches tall.
Multiple passes are automatically
printed for later paste-up
when necessary. NOW YOU CAN PRINT BIG CHARTS ON A INKJET PRINTER!
Gann
Angles:
Draw angles from All highs and lows, Major highs
and lows, Back 360 highs and lows and
User Selected highs and lows. Cycle counts of Selected angles are
included in printouts.
Back 360 angles are multiples of 360 time units (45, 60, or 72) from
the cursor's position.
Individually enable or disable the 1x1, 2x1, 3x1, 4x1, 8x1, 1x2, 1x3,
1x4,
1x8 angles. The
rate of rise of the 1x1 angle can be set by the user.
The slope of
the angles is automatically
adjusted for changes in the chart's
price scale so that the 1x1
relationship is maintained.
Individually enable or disable the up-trend, downtrend, up from lows,
down from highs,
angles from lows, highs or zero
Gann
Squares:
Natural squares of 120, 360, 144, 52, 60, 72, 180, 90 are created
with a
single hit of the
number keys 2 through 9. Key 1 is reserved for a user
defined "hot"
square.
Squares of the highs, lows or ranges can be created with a single
keystroke. Up to 5
squares can be saved with each file setup.
Unlimited when combined with batch mode.
Individually enable or disable the 1x1, 2x1, 3x1, 4x1, 8x1, 1x2, 1x3,
1x4,
1x8 angles, Time
Angles, Time Divisions, Price divisions inside the
square.
Division of the range and "7 times the base" can be converted into a
square of the range
with a single keystroke.
Gann Planets
Print or display planet earth or sun views of longitude converted to
price following Gann's
methods. The longitude to price conversion factor can be set by the
user.
Individually enable or disable each planet's plot and any of the
following planet aspects: 5
5/8°, 7½°, 11¼°, 15°, 22½°,
30°, 36°, 40°, 45°, 60°, 72°, 90°,
120°, 180°, 360° plus the
zodiac sign divisions.
The longitude and aspect distances for the date of the cursor are
displayed for exact
measurements
Print or display the planet averages, MOF, CE, Average of 5, 6 and 9.
Click here
for an example.
Gann Swing
Charts:
New with version 3.0 is Gann's Trend
Line Indicator and Main Trend Indicator. The Trend Line Indicator is
a price indicator. The trend line follows the high or low price when
the previous swing is broken by a certain number of points. The user
can set this trigger point.
The Main Trend Indicator requires that
the market make higher highs or lower lows for a certain number of
days before the line is moved up or down. Gann usually used 3 days in
his work, however this value is also user defined.
With these indicators
Gann was looking for an "overbalance" of price or time. For example,
if a market goes up for 4 days, reacts for 2 and goes up 4 days and
then reacts for 3 or more, Gann would say there was an overbalance of
time since the market has more down days than before.
his would be
an indication of a possible change of trend. Ganntrader 3.0 adds a
"Shade Swings" feature that gives a quick visual indication by the
change in the widths and heights of the boxes surrounding the swing
lines. Also, if both the Main Trend and Trend Line Indicators are on
the screen at once, the boxes change to green on those periods when
both indicators are moving in the same direction.
Batch
Mode:
Information such as the chart scale,
value of the 1x1 and planet angles, setup of squares and angles, type
of daily chart and printer grid pattern can be saved for future use
the next time the file is loaded. The setup can be saved individually
or as part of a group of setups in batch files. Each setup in the
batch file can be scrolled to the screen by hitting the TAB key. The
setups in the batch can also be sent to the printer for hours of
unattended printing.
Technical
Specifications:
Ganntrader requires a 486 or better,
at least 16 Mb RAM, although a fast Pentium machine with at
least 64 Mb RAM is recommended. Ganntrader will utilise a maths
co-processor if installed. Chart printing requires any IBM or Epson
dot matrix continuous form printer, 9 or 24 pin for unlimited length
charts. GT3 now supports Espon Stylus Printers. Page printers such as laser printers are supported with
screen dump program supplied.
Ganntrader reads CSI, QuickTrieve,
CSI, CompuTrac or MetaStock
data formats with data file
length limited only by available memory (5Mb would permit 50,000
days). Up to 1200 price bars can be displayed on the screen,
depending on video mode, with unlimited zoom and scroll capability
down to 10 bars on the screen. ADEST supplies Australian US and World futures
and share data to work in GannTrader 3
Ganntrader works in Win XP, Win 2000, Win ME,
Win NT, Win 98 & Win 95.
Supports EGA, VGA, SVGA 800x600,
1024x798, 1280x1024 colour modes.
Key
Benefits
-
The original AND only complete Gann program available
-
includes every aspect of Gann's methods
-
pure unadulterated Gann
CLICK HERE for
examples of GT 3.0 CHARTS!!
Pricing: All
major credit cards Accepted!
Your NO RISK
GUARANTEE:
FULL 30 DAY MONEY BACK GUARANTEE ON GANNTRADER 3 Software.
If you are not satisfied with the software just return it within 30 days
and receive
a full discount on the purchase price. Shipping not included.
Order GT 3 on Line Securely Click here
Or see our main catalogue
Click here=> Catalog
Want to know
more about Gann?
Go to Who
is Gann
Go to Gann
books
Go to Gann
courses
Go to Peter
Pich's comments about
Ganntrader
For all other enquiries click here
Real
Traders Real Methods
